Air Sea Containers

Need Some Advice? Request a Callback

Code 11

Product & Assembly Information: Code 11 – 4G/X15/S

4G Fibreboard Box - OUTER PACK - 4G 11

Our 4G Fibreboard Box 4G/X15/S must be used with the specific ‘approved with’ inner packaging listed below and must not exceed the maximum capacity for each inner package. Approved for packing group I, II & III. Gross package must not exceed 15kg. This 4G box is approved for shipping liquid dangerous goods. For approved inners torque values please refer to the Torque Values sheet on our FAQ page.
Code 11 Fibreboard box

Assembly Sheet

To ensure the packaging can fulfil its capability, it is important to pack the box correctly and compliantly as per the assembly instructions. If packed incorrectly, you risk invalidating the UN certification and the substance being compromised during transit. It is the shippers responsibility to ensure the assembly instructions are strictly followed.

Instructional Video

How to assemble 4G Fibreboard Box 4G/X15/S

Assemble the box, folding in the bottom flaps as numbered and sealing the base with 50mm adhesive tape in a “U” shape. Place the approved inner into the 4G box. Close the outer box by folding the flaps as numbered. Seal with 50mm adhesive tape in a “U” shape. Your product is now correctly packaged and ready for the appropriate hazard labels to be affixed along with any other necessary consignment information.

FAQs

Assemble the box, begin by folding in the bottom flaps first and sealing the base with 50mm adhesive tape in a “U” shape. Please note no vermiculite is required. Place the approved inner packaging inside the box (1x jerricans - code 27/NAT). Close the top flaps of the box and seal with 50mm adhesive tape in a “U” shape.
In the case of 4G packaging, the number stated on the UN specifications mark is the number corresponding to the maximum gross mass in kilograms, at which the design type has been tested. Meaning, 15kg is the gross mass weight for this specific box.
No. Each 4G packaging design has been tested and approved with the use of specific inner packaging. You must use the same inner packaging as used in the testing process. The approved inners for this 4G box are listed above. For approved inners torque values please refer to the Torque Values sheet on our FAQ page. (Link provided at top of this page)
For this specific 4G/X15/S box, vermiculite is NOT required as a cushioning.
No. Tapes come in various sizes and types, they are designed to seal 4G boxes to avoid them opening or the inner packaging escaping during transport and have been tested for their capability. You must use the same tape and method as used in the testing process. The approved tapes and taping method for this 4G box is, seal with 50mm adhesive tape in a “U” shape. This is also listed above and can also be found on the assembly instructions.

Your Quote

View Full Quote 0
Call us