Product & Assembly Information: Code 14 – 4G/X12/S

Code 14 Fibreboard Box

Assemble the box, begin by folding in the bottom flaps first and sealing the base with 75mm adhesive tape in a “U” shape. Please note no vermiculite is required. Place the approved inner packaging inside the box (1x jerricans - Code 22/B or Code 0022/NAT). Close the top flaps of the box and seal with 75mm adhesive tape in a “U” shape.

In the case of 4G packaging, the number stated on the UN specifications mark is the number corresponding to the maximum gross mass in kilograms, at which the design type has been tested. Meaning,12kg is the gross mass weight for this specific box.

No. Each 4G packaging design has been tested and approved with the use of specific inner packaging. You must use the same inner packaging as used in the testing process. The approved inners for this 4G box are listed above. For approved inners torque values please refer to the Torque Values sheet on our FAQ page (Link provided above).

For this specific 4G/X12/S box, vermiculite is NOT required as a cushioning.

No. Tapes come in various sizes and types, they are designed to seal 4G boxes to avoid them opening or the inner packaging escaping during transport and have been tested for their capability. You must use the same tape and method as used in the testing process. The approved tapes and taping method for this 4G box is, seal with 75mm adhesive tape in a “U” shape. This is also listed above and can also be found on the assembly instructions.