UK
Code 812
Code 812 fibreboard box
Buffer Partition
3 x Dividers
2 x Layer pads
Buffer Partition
3 x Dividers
2 x Layer pads
Assembly Sheet
To ensure the packaging can fulfil its capability, it is important to pack the box correctly and compliantly as per the assembly instructions. If packed incorrectly, you risk invalidating the UN certification and the substance being compromised during transit. It is the shippers responsibility to ensure the assembly instructions are strictly followed.
Instructional Video
How to assemble 4G Fibreboard Box 4G/X11/S
1) Assemble the box and tape at the base with 50mm adhesive tape in a "U" shape before adding the buffer partitions and a set of dividers. Then add a small layer of vermiculite. 2) Place a layer of four bottles into the box and add vermiculite to just above the level of the bottles. 3) Add a layer pad, another divider and small layer of vermiculite and repeat step 2. 4) If packing 12 bottles repeat step 3. 5) Fill all void spaces within the box and once closed, box must be sealed with 50mm adhesive tape in a "U" shape.
FAQs
In the case of 4G packaging, the number stated on the UN specifications mark is the number corresponding to the maximum gross mass in kilograms, at which the design type has been tested. Meaning, 11kg is the gross mass weight for this specific box.
No. Each 4G packaging design has been tested and approved with the use of specific inner packaging. You must use the same inner packaging as used in the testing process. The approved inners for this 4G box are listed above.
For approved inners torque values please refer to the Torque Values download sheet at the top of this page.
For this specific 4G/X11/S box, buffer partitions, dividers, layer pads and vermiculite is required as an absorbent and cushioning to prevent movement of the inner packaging.
No. Tapes come in various sizes and types, they are designed to seal 4G boxes to avoid them opening or the inner packaging escaping during transport and have been tested for their capability. You must use the same tape and method as used in the testing process. The approved tapes and taping method for this 4G box is, seal with 50mm adhesive tape in a “U” shape. This is also listed above and can also be found on the assembly instructions.
Quick Links
Product Categories
Contact Details
Accreditations
© 2024 Air Sea Containers
