Need Some Advice? Request a Callback

Code 1038

Product & Assembly Information: Code 1038 – 4DV/X30/S

4DV Plywood Box, 30kg

UN Plywood Box 4DV/X30/S, for use with non-specific inners. Approved for packing groups I, II & III. Maximum permitted weight of the inner containers and their product contents is 10kg, whilst the gross package must not exceed 30kg. Vermiculite must be used with this 4DV Plywood box.
Code 1038 Plywood Box, Polythene Bag

Assembly Sheet

To ensure the packaging can fulfil its capability, it is important to pack the box correctly and compliantly as per the assembly instructions. If packed incorrectly, you risk invalidating the UN certification and the substance being compromised during transit. It is the shippers responsibility to ensure the assembly instructions are strictly followed.

Instructional Video

How to assemble UN Plywood Box 4DV/X30/S

Assemble the box, begin by unfolding the box and ensuring all slots on the base are aligned with the corresponding locking tabs, push down the base firmly, bend each tab into locked position, tap the tab securely in place using either the tab locking tool supplied separately or set of suitable pliers and hammer. Place the supplied liner bag inside the box and add a layer of vermiculite at the bottom, to a depth of at least 35mm before placing your inner product(s) ensuring minimum spacing of 65mm. Completely fill all remaining space with vermiculite ensuring a minimum layer of 35mm at the top of the box. Seal bag with 75mm adhesive tape. Finish by placing the lid on top of the box and locking close, as with the base using the separately supplied tab locking tool or set of suitable pliers and hammer."


Maximum permitted weight of the inner containers and their product contents is 10kg.
You can choose your own appropriate non-specific inners, Articles can also be used (refer to relevant regulations).
This 4DV box has been tested and is approved with Vermiculite only, no other cushioning should be used in this box.

Your Quote

View Full Quote 0