Need Some Advice? Request a Callback

Code 730

Product & Assembly Information: Code 730 – 4G/X13/S

4G Fibreboard Box: OUTER PACK 4G 730

4G fibreboard box 4G/X13/S, must be used with specific 'approved with inners specified below. Approved for packing groups I, II & III. Gross package weight must not exceed 13kg. Holds 1x 5L steel drum. Approved for shipping Liquids . Vermiculite is not required with this 4G box.
Fibreboard Box Code 730

Assembly Sheet

To ensure the packaging can fulfil its capability, it is important to pack the box correctly and compliantly as per the assembly instructions. If packed incorrectly, you risk invalidating the UN certification and the substance being compromised during transit. It is the shippers responsibility to ensure the assembly instructions are strictly followed.

Instructional Video

How to assemble 4G Fibreboard Box 4G/X13/S

Assemble the box, begin by folding in the bottom flaps first and sealing the base with 75mm adhesive tape in a “U” shape. Place the supplied foam partitions inside the box: Please note no vermiculite is required. Place the approved inner packaging inside the box (1x steel drum). Close the top flaps of the box and seal with 75mm adhesive tape in a “U” shape.


In the case of 4G packaging, the number stated on the UN specifications mark is the number corresponding to the maximum gross mass in kilograms, at which the design type has been tested. Meaning, 13kg is the gross mass weight for this specific box.
No. Each 4G packaging design has been tested and approved with the use of specific inner packaging. You must use the same inner packaging as used in the testing process. The approved inners for this 4G box are listed above.
For this specific 4G/X13/S box, NO vermiculite is required as an absorbent or cushioning.
No. Tapes come in various sizes and types, they are designed to seal 4G boxes to avoid them opening or the inner packaging escaping during transport and have been tested for their capability. You must use the same tape and method as used in the testing process. The approved tapes and taping method for this 4G box is, seal with 75mm adhesive tape in a “U” shape. This is also listed above and can also be found on the assembly instructions.

Your Quote

View Full Quote 0